Stump Grinding in Pisgah Forest, NC.
Around Pisgah Forest the median lot is 1.16 acres. Some of the ground is flood-rated bottomland and some is hillside over shallow rock, and the stump job is different on each.
We'll reach out within 24 hours to schedule your free on-site estimate. Prefer to talk now? Call (828) 702-7125.
- We confirm the details and book a time
- We walk the site and talk through the slope, soil, and access
- You get a clear, written, line-item scope
On the bottom, waiting for firm ground. On the hill, working around rock. Within a mile and a half of Pisgah Forest the USDA soil survey maps 30% of the ground as wet soil, with the water table about 6 inches down on the largest unit, and a machine cannot cross that when it is soaked. Where the Brasstown, Junaluska and Tsali soils are mapped, bedrock is 18 to 36 inches down, and roots can run shallow over it. Stump grinding in Western NC typically runs $75 to $400 per stump.
Bottomland and shallow rock
The two largest soil units near Pisgah Forest are rated frequently flooded and together cover 31% of the area. Trees on that ground can root near the surface, so a stump can come with wide roots, and an uprooted tree leaves a root plate to deal with first. About 41% of the ground is at a 15% slope or steeper, where stumps on a bank are cut low and left. The median lot is 1.16 acres. We grind 6 to 12 inches below grade, or to rock, and fill and level the spot.
See the full service on our tree & storm cleanup page, and the wider Pisgah Forest service area.
USDA soil survey, USGS and NOAA figures for the ground within 1.5 miles of Pisgah Forest.
The soils mapped around Pisgah Forest.
What the USDA soil survey maps inside a circle of 1.5 miles around Pisgah Forest: 49 soil map units over about 4,500 acres. These are the largest, with the slope and water figures behind the work on lots around Pisgah Forest.
| Soil map unit | Share of ground | Slope | Drainage class | On the map | What it means |
|---|---|---|---|---|---|
| Toxaway loam, 0 to 2 percent slopes, frequently flooded | 19% | 1% | Very poorly drained | flooding: frequent; water table about 6 in down | Drain + grade |
| Rosman fine sandy loam, 0 to 2 percent slopes, frequently flooded | 13% | 1.1% | Well drained | flooding: frequent; water table about 51 in down | Flood-prone: build high |
| Brasstown-Junaluska complex, high precipitation, 15 to 30 percent slopes | 11% | 23% | Well drained | bedrock about 36 in down | Wall / slope work |
| Junaluska-Tsali complex, high precipitation, 30 to 50 percent slopes | 8% | 40% | Well drained | bedrock about 18 in down | Wall / slope work |
| Brasstown-Junaluska complex, 8 to 15 percent slopes | 6% | 12.5% | Well drained | bedrock about 36 in down | Surface grade |
| Fannin fine sandy loam, 30 to 50 percent slopes | 6% | 40% | Well drained | no flooding, shallow rock or shallow water on the map | Wall / slope work |
Across the whole circle: 41% of the ground is mapped at a 15% slope or steeper, 30% as moderately well to very poorly drained soil, and 32% with bedrock within about 40 inches. The town point sits in the USGS watershed unit "Lyday Creek-French Broad River". Nearest NOAA rainfall normal: 69 inches a year (Brevard 0.7 NNE, 2.2 miles off). Pulled 2026-11-09 from USDA-NRCS Soil Data Access, the USGS hydrography datasets and NOAA 1991–2020 normals. A soil map is not a site test: we confirm your Pisgah Forest lot on the free site walk.
What stump grinding costs in Pisgah Forest, NC
These are typical Western North Carolina market ranges, not a Maidenhair Landscaping quote. North Carolina construction runs about 12% below the national average, but our mountain terrain — 15–40%+ slopes, weathered bedrock and saprolite, clay, and tight access — pushes most jobs toward the high end of every range. A flat infill lot sits low; a steep escarpment lot sits at or above the top. Your exact price comes from a free on-site estimate.
| Item | Typical WNC range | Notes |
|---|---|---|
| Tree removal (per tree) | $400–$2,000 | small to large; very large or hazard trees $2,000-$4,000+ |
| Emergency / storm removal | $600–$4,000 | tree on a structure or hazard access; insured |
| Stump grinding | $75–$400/stump | ~$3-$5 per inch of diameter |
What drives it: tree height and diameter, lean and proximity to the house or lines, equipment access on a slope, hazard/emergency conditions, and haul-off vs chip-on-site.
Source: published WNC/NC market ranges via angi.com and homeguide.com . Exact pricing on your lot comes from a free on-site estimate — call (828) 702-7125.
How we do it in Pisgah Forest.
Look & locate
We check each stump on your Pisgah Forest property for size, rock, surface roots and how the machine reaches it.
Grind below grade
The stump and the surface roots that would catch a mower are ground 6–12 inches below grade.
Backfill
The hole is filled with the grindings or with clean soil, your choice.
Rake & finish
We rake the spot level and leave it ready to seed, plant or build on.
Stump Grinding in Pisgah Forest: common questions
Can you grind stumps left by trees the flood knocked over?
Is one stump worth a visit?
Are you local to Pisgah Forest, and are you insured?
Stump Grinding near Pisgah Forest.
We work Pisgah Forest and the towns around it. Same service, local detail for each:
Other services we do in Pisgah Forest.
Need stump grinding in Pisgah Forest?
Tell us what you're dealing with — we'll walk the lot, read the soil and grade, and put a real number in writing, free.
We'll reach out within 24 hours to schedule your free on-site estimate. Prefer to talk now? Call (828) 702-7125.
- We confirm the details and book a time
- We walk the site and talk through the slope, soil, and access
- You get a clear, written, line-item scope