Landscaping & stonework in Clyde, NC, built for mountain ground.
Landscaping in Clyde: clay loam hillsides above the Pigeon River. More than half the ground is at a 15% slope or steeper and lots average three quarters of an acre.
We'll reach out within 24 hours to schedule your free on-site estimate. Prefer to talk now? Call (828) 702-7125.
- We confirm the details and book a time
- We walk the site and talk through the slope, soil, and access
- You get a clear, written, line-item scope
Maidenhair Landscaping is a Hendersonville-based, owner-run crew serving Clyde. We do retaining walls, drainage and grading, driveway grading, patios and steps, tree and storm cleanup, mulch and cleanups, lawn care and landscape design. Within a mile and a half of Clyde the USDA soil survey maps 58% of the ground at a 15% slope or steeper, and about a third of the area is Hayesville clay loam labeled eroded. Clay slopes need walls that drain and ground that stays covered. Free on-site estimate, 24hr callback.
Landscaping services in Clyde, NC
Landscape installation and construction, landscape maintenance, lawn and turf care, and tree service for homes in Clyde and across Haywood County. Pick the job below to see how we handle it here.
Retaining Walls
Boulder, stone & block retaining walls that hold the mountain.
Clyde →Hardscaping & Patios
Paver patios, walkways, steps & fire pits built to last on mountain ground.
Clyde →Drainage & Grading
French drains, regrading & erosion control read off your lot's real drainage class.
Clyde →Tree & Storm Cleanup
Tree removal, storm cleanup, brush & stumps — get the property clear and safe.
Clyde →Mulch & Cleanups
Mulch, leaf removal, bed edging & shrub trimming — seasonal upkeep done right.
Clyde →Lawn Care
Mowing, aeration, seeding & sod built for mountain clay and grade.
Clyde →Landscape Design
Planting plans & landscape design that work with the grade, not against it.
Clyde →Also in Clyde: driveway grading, stump grinding.
The ground under Clyde
Clyde sits at 2,532 feet on the Pigeon River, with Conner Mill Branch, Chambers Branch and Jones Cove Branch coming off the hills. Hayesville clay loam covers 20% of the area on 15 to 30 percent slopes and 12% on 8 to 15 percent. An Evard and Cowee complex on 15 to 30 percent slopes covers 11%, with bedrock about 27 inches down. Only 16% of the ground is under an 8% slope, and rock is within 40 inches under 22%. Wet soil is limited to about 3% of the ground, a strip rated frequently flooded. The nearest NOAA station, 4.4 miles off, averages 50 inches of precipitation a year. The median lot is 0.78 acres.
What that means for a Clyde property
Clay holds water and gets heavy, so the working parts of a retaining wall here are the stone and pipe behind its face. Eroded clay also sheds rain, and on a three-quarter-acre sloped lot that runoff cuts rills in a bank and ruts in a gravel drive. Swales and regrading slow it down. Bare clay grows little until it has topsoil and cover, so banks get seeded and mulched. On the gentler ground, a patio goes on a deep compacted base so the clay under it cannot heave it.
Steep slope landscaping in Haywood County, NC
Within a mile and a half of Clyde, the USDA soil survey maps 58% of the ground at a 15% slope or steeper and 18% at 30% or steeper. Haywood County ridge soils like Plott run to 36.5% slopes, so a hillside yard usually needs the water handled first, then a wall or terrace to hold the cut, then the patio, steps, or planting on top. For a steep Clyde lot the usual pieces are boulder or block retaining walls to hold the grade, drainage and grading to move runoff off the slope, natural stone steps to tie the levels together, and erosion control where a bank has already started to move. Terracing a slope into usable, mowable levels is the same job done in stages.
The soils mapped around Clyde.
What the USDA soil survey maps inside a circle of 1.5 miles around Clyde: 36 soil map units over about 4,500 acres. These are the largest.
| Soil map unit | Share of ground | Slope | Drainage class | On the map | What it means |
|---|---|---|---|---|---|
| Hayesville clay loam, 15 to 30 percent slopes, eroded | 20% | 23% | Well drained | no flooding, shallow rock or shallow water on the map | Wall / slope work |
| Hayesville clay loam, 8 to 15 percent slopes, eroded | 12% | 12% | Well drained | no flooding, shallow rock or shallow water on the map | Surface grade |
| Evard-Cowee complex, 15 to 30 percent slopes | 11% | 22% | Well drained | bedrock about 27 in down | Wall / slope work |
| Fannin loam, 30 to 50 percent slopes, eroded | 7% | 40% | Well drained | no flooding, shallow rock or shallow water on the map | Wall / slope work |
| Udorthents-Urban land complex, 2 to 50 percent slopes | 6% | 25.1% | Somewhat excessively drained | no flooding, shallow rock or shallow water on the map | Wall / slope work |
| Evard-Cowee complex, 30 to 50 percent slopes | 5% | 40% | Well drained | bedrock about 27 in down | Wall / slope work |
Across the whole circle: 58% of the ground is mapped at a 15% slope or steeper, 3% as moderately well to very poorly drained soil, and 22% with bedrock within about 40 inches. The town point sits in the USGS watershed unit "Beaverdam Creek-Pigeon River". Nearest NOAA rainfall normal: 50 inches a year (Waynesville 1 E, 4.4 miles off). Pulled 2026-11-09 from USDA-NRCS Soil Data Access, the USGS hydrography datasets and NOAA 1991–2020 normals. A soil map is not a site test: we confirm your lot on the free site walk.
Landscaping in Clyde: common questions
What grows on a bare clay bank in Clyde?
Do you do lawn care and landscape maintenance in Clyde?
Landscaping near Clyde.
We work Clyde and the towns around it. Each has its own page with its own ground:
Have a project in Clyde?
Retaining wall, patio, drainage, a yard that needs taking back — tell us what you're dealing with and we'll walk it with you, free.
We'll reach out within 24 hours to schedule your free on-site estimate. Prefer to talk now? Call (828) 702-7125.
- We confirm the details and book a time
- We walk the site and talk through the slope, soil, and access
- You get a clear, written, line-item scope