Drainage & Grading · Driveway Grading

Driveway Grading across Western North Carolina.

Regrade, crown, and gravel a mountain driveway so it stops washing out.

Who does driveway grading in Western North Carolina?

Driveway Grading from Maidenhair Landscaping — a Hendersonville-based, owner-run crew covering 6 Western North Carolina counties. Regrade, crown, and gravel a mountain driveway so it stops washing out. We build for mountain conditions — slope, clay, and freeze-thaw — and price every job from a free on-site estimate, with a 24hr callback.

What it costs

What driveway grading costs in Western NC

These are typical Western North Carolina market ranges, not a Maidenhair Landscaping quote. North Carolina construction runs about 12% below the national average, but our mountain terrain — 15–40%+ slopes, weathered bedrock and saprolite, clay, and tight access — pushes most jobs toward the high end of every range. A flat infill lot sits low; a steep escarpment lot sits at or above the top. Your exact price comes from a free on-site estimate.

Driveway grading & gravel — typical Western NC ranges (published market data, 2026-06-24)
Item	Typical WNC range	Notes
Regrade existing drive	$0.75–$2.50/sq ft	level + reshape; maintenance regrades from ~$0.50
ABC / #57 gravel	$20–$45/ton	~3-4 tons per 100 sq ft for a 2-3 in. layer
Full grade + gravel	$1–$3/sq ft	new cut, crown/culvert, stone

What drives it: length on grade, slope, culverts/crossings, crown vs in-slope, stone depth, and NCDOT encroachment if tying to a state road.

Source: published WNC/NC market ranges via homewyse.com and homeguide.com . Exact pricing on your lot comes from a free on-site estimate — call (828) 490-1245.

Standards and data behind this page: NC DEQ Erosion and Sediment Control (state rules for land-disturbing work) · NC Sedimentation Pollution Control Act, G.S. 113A Art. 4 (the one-acre plan trigger) · USDA-NRCS Web Soil Survey (the soil series, slope and drainage data on every town page)

FAQ

Driveway Grading: common questions

What does driveway grading cost in Western North Carolina?

Typical published WNC ranges: regrade existing drive $0.75-$2.5 /sq ft; abc / #57 gravel $20-$45 /ton; full grade + gravel $1-$3 /sq ft. What moves the price: length on grade, slope, culverts/crossings, crown vs in-slope, stone depth, and NCDOT encroachment if tying to a state road. The exact number comes from a free on-site estimate, because slope, access and soil around Hendersonville move the price more than the material does.

Which towns do you cover for driveway grading?

Maidenhair Landscaping covers 6 Western North Carolina counties from Hendersonville: Henderson, Buncombe, Transylvania, Haywood, Polk and Madison. Every town in the footprint has its own driveway grading page below, with that town's soil, slope and drainage numbers.

Do I need a permit for driveway grading in North Carolina?

For a single-lot job, usually not. Under the NC Sedimentation Pollution Control Act (NC GS 113A-57(4) (Sedimentation Pollution Control Act of 1973)) an Erosion and Sedimentation Control plan is only required when land-disturbing activity uncovers more than one acre, filed 30 or more days before work starts, at $119 per acre. A drain trench or a yard regrade disturbs far less than that. Tying into a state road ditch is a separate NCDOT encroachment permit, which we flag up front.

Service area

Driveway Grading in your town.

We cover 6 WNC counties from our Hendersonville base. Each link below is a local page with that town's real soil, slope, and what it means for the work — 35 pages in all for this service.

Free estimate

Need driveway grading?

Tell us about the project — we'll walk the lot, read the soil and grade, and put a real number in writing, free.

Prefer to talk? (828) 490-1245