Stump Grinding in Maggie Valley, NC.
Maggie Valley is stony ground at 3,015 feet, with 61% of it at a 30% slope or steeper. Stone in the soil and frozen ground in winter both shape a stump job here.
We'll reach out within 24 hours to schedule your free on-site estimate. Prefer to talk now? Call (828) 702-7125.
- We confirm the details and book a time
- We walk the site and talk through the slope, soil, and access
- You get a clear, written, line-item scope
Stone and slope. Within a mile and a half of Maggie Valley the USDA soil survey labels all five of the largest soil units stony, and it maps 78% of the ground at a 15% slope or steeper. Stone around the roots wears the grinder's teeth and slows the work, so we probe before quoting. On the steep ground a stump is cut low and left to hold the slope. Where the machine can stand, we grind 6 to 12 inches below grade, or to rock. Stump grinding in Western NC typically runs $75 to $400 per stump.
Stony loam and cobbly flats
Saunook loam, labeled stony, covers 15% of the area near Maggie Valley on 15 to 30 percent slopes and 9% on 8 to 15 percent. The flats are Dellwood cobbly sandy loam, about 5% of the area, rated occasionally flooded. An Edneyville and Chestnut complex on 50 to 95 percent slopes covers 24%, with bedrock about 28 inches down, and no grinder belongs there. The median lot is 0.6 acres. At this elevation the ground freezes in winter, and a ground-out hole is better filled and leveled after a thaw.
See the full service on our tree & storm cleanup page, and the wider Maggie Valley service area.
USDA soil survey, USGS and NOAA figures for the ground within 1.5 miles of Maggie Valley.
The soils mapped around Maggie Valley.
What the USDA soil survey maps inside a circle of 1.5 miles around Maggie Valley: 37 soil map units over about 4,500 acres. These are the largest, with the slope and water figures behind the work on lots around Maggie Valley.
| Soil map unit | Share of ground | Slope | Drainage class | On the map | What it means |
|---|---|---|---|---|---|
| Edneyville-Chestnut complex, 50 to 95 percent slopes, stony | 24% | 63.8% | Well drained | bedrock about 28 in down | Wall / slope work |
| Saunook loam, basin, 15 to 30 percent slopes, stony | 15% | 22% | Well drained | no flooding, shallow rock or shallow water on the map | Wall / slope work |
| Saunook loam, basin, 8 to 15 percent slopes, stony | 9% | 11% | Well drained | no flooding, shallow rock or shallow water on the map | Surface grade |
| Plott fine sandy loam, 50 to 95 percent slopes, stony | 9% | 72% | Well drained | no flooding, shallow rock or shallow water on the map | Wall / slope work |
| Edneyville-Chestnut complex, basin, 30 to 50 percent slopes, stony | 6% | 39.8% | Well drained | bedrock about 35 in down | Wall / slope work |
| Dellwood cobbly sandy loam, 0 to 3 percent slopes, occasionally flooded | 5% | 1.9% | Moderately well drained | flooding: occasional; water table about 36 in down | Drain + grade |
Across the whole circle: 78% of the ground is mapped at a 15% slope or steeper, 8% as moderately well to very poorly drained soil, and 46% with bedrock within about 40 inches. The town point sits in the USGS watershed unit "Upper Johnathans Creek". Nearest NOAA rainfall normal: 60 inches a year (Maggie Valley 2.1 ENE, 2.4 miles off). Pulled 2026-11-09 from USDA-NRCS Soil Data Access, the USGS hydrography datasets and NOAA 1991–2020 normals. A soil map is not a site test: we confirm your Maggie Valley lot on the free site walk.
What stump grinding costs in Maggie Valley, NC
These are typical Western North Carolina market ranges, not a Maidenhair Landscaping quote. North Carolina construction runs about 12% below the national average, but our mountain terrain — 15–40%+ slopes, weathered bedrock and saprolite, clay, and tight access — pushes most jobs toward the high end of every range. A flat infill lot sits low; a steep escarpment lot sits at or above the top. Your exact price comes from a free on-site estimate.
| Item | Typical WNC range | Notes |
|---|---|---|
| Tree removal (per tree) | $400–$2,000 | small to large; very large or hazard trees $2,000-$4,000+ |
| Emergency / storm removal | $600–$4,000 | tree on a structure or hazard access; insured |
| Stump grinding | $75–$400/stump | ~$3-$5 per inch of diameter |
What drives it: tree height and diameter, lean and proximity to the house or lines, equipment access on a slope, hazard/emergency conditions, and haul-off vs chip-on-site.
Source: published WNC/NC market ranges via angi.com and homeguide.com . Exact pricing on your lot comes from a free on-site estimate — call (828) 702-7125.
How we do it in Maggie Valley.
Look & locate
We check each stump on your Maggie Valley property for size, rock, surface roots and how the machine reaches it.
Grind below grade
The stump and the surface roots that would catch a mower are ground 6–12 inches below grade.
Backfill
The hole is filled with the grindings or with clean soil, your choice.
Rake & finish
We rake the spot level and leave it ready to seed, plant or build on.
Stump Grinding in Maggie Valley: common questions
Can you grind a stump beside a cabin on a slope?
I am not here year-round. Can the stumps be done while I am away?
Are you local to Maggie Valley, and are you insured?
Stump Grinding near Maggie Valley.
We work Maggie Valley and the towns around it. Same service, local detail for each:
Other services we do in Maggie Valley.
Need stump grinding in Maggie Valley?
Tell us what you're dealing with — we'll walk the lot, read the soil and grade, and put a real number in writing, free.
We'll reach out within 24 hours to schedule your free on-site estimate. Prefer to talk now? Call (828) 702-7125.
- We confirm the details and book a time
- We walk the site and talk through the slope, soil, and access
- You get a clear, written, line-item scope